Powered by Translate

Video Library

Gate Grounding Connectors
DMC Power's line of Gate Connectors. To learn more about DMC Power Swage tools and connectors, visit our website: http://www.dmcpower.com.
6" Bus Connector Installation SOP
Installing 6" Bus doesn't have to be hard! With the PLT115 Swage Tool from DMC Power you can connect anywhere in a fraction of the time without having to ...
Cable Connector Installation SOP
Learn to install DMC Power Cable Connectors in 60 seconds! Complete on-site training available anywhere, anytime. Contact DMC Power for more information.
Swage Tool Setup & SOP
Let DMC Power show you how quick and easy it is set up the hydraulic pump and Swage Tool so you can start Swaging!
Swage Tooling Maintenance
Cleaning and maintenance of Swage Tools is easy! We'll show you how to break everything down, techniques for cleaning and putting it all back together again.
Complete Substation Project - Anchorage, AK
This Substation in Anchorage was constructed with only DMC Power connectors and tooling. In this video you will see: - 3" Bus Connectors - 336 Tulip, 636 ...
ACSS Splice over the rollers
A 795 ACSS Splice going over the roller during a testing session. To learn more about DMC Power Swage tools and connectors, visit our website: ...
ACSR Splice Pulled Through the Rollers
Save time and money by pulling our Splices over the roller! The DC96 shown here is connected to 1590 ACSR cable. To learn more about DMC Power Swage ...
AAC Deadend Installation
This video shows how easy it is for crews to Swage and inspect a 765kV, 4327 kcmil AAC Deadend. To learn more about DMC Power Swage tools and ...
2" Bus Splice Installation
The PLK1100D32 is a 2" Bus Splice. This video shows how easy the installation is: 1. Mark the insertion depth 2. Align the connector and bus as marked 3.
3" Bus to Offset 4", 4-Hole NEMA Pad
With just one Swage crews are able to connect a 3" Bus Terminal with a 4", 4-Hole NEMA Pad. PLK1880D48 To learn more about DMC Power Swage tools and ...
6" Bus Splice Installation
DMC Power's 6" Bus Tool (PLT115) is showing here Swaging a 6" Bus Splice to the Bus Bar with only 2 Swages per side. To learn more about DMC Power ...
GC888 - 250 MCM to 250 MCM
DMC Power's newest Grounding Connector - the GC888. Shown here connecting 250 MCM to 250 MCM Copper Cables. To learn more about DMC Power ...
GC733 - Split Run Tee Installation
DMC Power's GC733 is a split run tee style grounding connector. To learn more about DMC Power Swage tools and connectors, visit our website: ...
How to Video - Installing Grounding Connectors
This video shows the 6 simple steps it takes to install DMC Power Ground Connectors. Hightlighted here is the GC721 Split Parallel with 4/0 & 500 MCM cables.
Split Parallel Ground Connector - 500 MCM to 1" Rebar
DMC Power's GC721 - Split Parallel connecting 500 MCM to 1" Rebar To learn more about DMC Power Swage tools and connectors, visit our website: ...
Battery Pump - Ground and Cable Applications
DMC Power battery pumps are available for remote applications. To learn more about DMC Power Swage tools and connectors, visit our website: ...
ACSS - 2 Stage 795 Drake Installation Guide
DMC Power's line of Full Tension Transmission connectors is now available for ACSS 2-Stage Installations. In this video you will witness the speed and ease of ...
Grounding Installation in High Water Areas
DMC Power's Swage tool being used to install grounded in an area with high water and mud. To learn more about DMC Power Swage tools and connectors, ...
DMC Power GC888 Ground Connector
Overview of our newest Ground Connector, the GC888. To learn more about DMC Power Swage tools and connectors, visit our website: http://www.dmcpower.com.